FENIX E01 V2.0 AAA FLASHLIGHT

FENIX

Out Of Stock

Shipping:
Calculated at Checkout
LaunchStock:
0
LaunchDate:
12/31/25 01:00AM
FENIX E01 V2.0 AAA FLASHLIGHT

FENIX E01 V2.0 AAA FLASHLIGHT

FENIX

Out Of Stock

Shipping:
Calculated at Checkout
LaunchStock:
0
LaunchDate:
12/31/25 01:00AM
free shipping for orders of $150 and more ORDERS OVER $150 SHIP FREE

The Fenix E01 V2.0 AAA Flashlight emits an impressive maximum 100 lumens from an included single AAA battery. Using an ultra-thin optical lens, this flashlight delivers a soft and balanced beam a max distance of 115ft (35m). Access three brightness levels with a quick twist of the head. At only 2.6” long and just over a half of an inch round, this little flashlight is built tough with an IP68 dustproof and waterproof rating. Super small and compact, this standard AAA battery flashlight is a great choice for your everyday carry needs.

 

E01 V2.0 Size:

Length: 2.62” (66.5mm)
Head: 0.59” (15mm)
Body: 0.55” (14mm)

E01 V2.0 Weight:

0.46 oz. (13g) excluding battery

E01 V2.0 Battery:

One included AAA battery

Included:

Pairdeer AAA battery, key chain

 

Additional Features of the E01 V2.0 AAA Flashlight

  • Utilizes Luminus SST20 Cold White LED with a lifespan of 50,000 hours.
  • Included one AAA battery.
  • Ultra-compact size for everyday carry.
  • One-handed operation with the rotating switch.
  • All-metal CNC machined body.
  • Premium type HAIII hard-anodized anti-abrasive finish.
 
 
 

On/off for E01 V2.0 AAA Flashlight

Tighten the light head to turn on the light, unscrew the light head to turn off the light.

Output Selection

Unscrew the light head and tighten it again within one second to cycle through Low→Med→High.

Battery Specifications

Type Dimensions Nominal Voltage Usability  
Ni-MH Battery AAA 1.2V Recommended √√
Alkaline Battery AAA 1.5V Usable √
Non-rechargeable Battery (Lithium) AAA 1.5V Usable √
Rechargeable Battery ( Li-ion) 10440 /

10450

 3.7V Banned ×

Battery Replacement

Unscrew the light head and insert the battery with the anode side (+) towards the light head, then screw the light head back on.

Intelligent Overheat Protection

The light will accumulate a lot of heat when used on High output level for extended periods. To reduce the temperature, the light will automatically step down a few lumens. High output level can be reselected if needed.

Usage and Maintenance for the E01 V2.0 AAA Flashlight

  • Disassembling the sealed head can cause damage to the light and will void the warranty.
  • Fenix recommends using an excellent quality battery.
  • If the light will not be used for an extended period, remove the battery, or the light could be damaged by electrolyte leakage or battery explosion.
  • Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare．
  • Periodic cleaning of the battery contacts improves the light’s performance as dirty contacts may cause the light to flicker, shine intermittently or even fail to illuminate for the following reasons:
    A: The battery needs replacing.
    Solution: Replace battery (Ensure battery is inserted according to the manufacturer’s   specifications).
    B: The threads, PCB board contact or other contacts are dirty.
    Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

Warning for the E01 V2.0 AAA Flashlight

  • This flashlight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the flashlight directly into anyone’s eyes.
  • All information provided in this manual is subject to change without prior notice.
 
!