FENIX E35 V3.0 FLASHLIGHT

The Fenix E35 V3.0 flashlight has been upgraded with high-performance features in mind. This EDC flashlight can now blast a maximum 3000 lumens a distance of 787ft (240m). Powered by an included 21700 (5000mAh) rechargeable Li-ion battery which not only allows this light to be extremely bright, but also has extended runtimes. Designed with ultrathin optical lens, the E35 V3.0 flashlight creates a soft and balanced beam. Convenient side switch activates all lighting modes and includes a battery level indicator. It’s hard to beat a 3000 lumen flashlight in a pint-sized light. Waterproof and dustproof, the Fenix E35 V3.0 is built to withstand the elements. Incredibly bright in a compact size makes this flashlight an everyday carry powerhouse.  THIS LIGHT DOES NOT HAVE A TAIL-SWITCH.

E35 V3.0 Size:

Length: 4.65” (118mm)
Diameter: 1.04” (26.5mm)

E35 V3.0 Weight:

2.36 oz. (67g) excluding battery

E35 V3.0 Battery:

One 21700 Li-ion rechargeable battery (included)

Included:

ARB-L21-5000U Li-ion battery, USB Type-C charging cable, lanyard, spare O-ring

Additional Features of the E35 V3.0 3000 Lumen Flashlight

• Utilizes Luminus SST70 cool white LED, with alifespan of 50,000 hours.
• Ultra-thin optical lens for soft and balanced beam.
• Digitally regulated circuit for maintaining a stable output.
• Reverse polarity protection, to protect from improper battery insertion.
• Boot-up battery level indication and low-voltage warning.
• Made of A6061-T6 aluminum.
• Premium type HAIII hard-anodized anti-abrasive finish.

On/off
Press and hold the 0.5 seconds to turn on/off the light.

Output Selection
With the light turned on, single click the side switch to cycle through Eco→Low→Med→High→Turbo.

Lock/Unlock
Lock: with the light switched off, double click the switch within 0.5 seconds to lock the light, the light will blink twice on Eco to indicate locked status.

Unlock: with the light locked, double click the switch within 0.5 seconds, the light will be unlocked and activated on Eco.

*In locked status, clicking or pressing the switch will activate 2 one-second blinks on Eco to indicate locked status.

Strobe
With the light switched on, press and hold the side switch for 1.2 seconds to enter Strobe, single click the side switch again to turn back to the previously used output level.

Intelligent Memory Circuit
The light memorizes the last selected output excluding strobe. When turned on again the previously used output will be recalled.

Battery Specification

* 21700 Li-ion batteries are powerful cells designed for commercial applications and must be treated with caution and handled with care. Only use quality batteries with circuit protection will reduce the potential for combustion or explosion; but cell damage or short circuiting are potential risks the user assumes.

Battery Replacement of the E35 V3.0 3000 Lumen Flashlight
Unscrew the light head and insert the battery with the anode side (+) towards the light head, then screw the light head back on.

Battery Level Indication
With the light switched off, single click the side switch to check the battery status, the indicator will last for 3 seconds.

• Green light on: saturated 100% – 85%
• Green light flashes: sufficient 85% – 50%
• Red light on: poor 50% – 25%
• Red light flashes: critical 25% – 1%

Note: This only works with Fenix ARB-L21 Series 21700 rechargeable Li-ion battery.

Intelligent Overheat Protection
The light will accumulate a lot of heat when used on Turbo and High output levels for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C, it will then allow the user for the reselection of Turbo mode.

Low-voltage Warning
When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Low output is reached. When this happens in Low output mode, the battery level indicator blinks red to remind you to timely recharge or replace the battery.

Note: This only works with Fenix ARB-L21 Series 21700 rechargeable Li-ion battery.

Usage and Maintenance of the E35 V3.0 3000 Lumen Flashlight

• Disassembling the sealed head can cause damage to the light and will void the warranty.
• Fenix recommends using an excellent quality battery.
• If the light will not be used for an extended period, remove the battery, or the light could be damaged by electrolyte leakage or battery explosion.
• Lock the light or take out the battery to prevent accidental activation during storage or transportation. Recharge a stored battery every four months to maintain optimal battery performance.
• Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare．
• Periodic cleaning of the battery contacts improves the lamp’s performance as dirty contacts may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following reasons:
  A: The battery needs replacing.
  Solution: Replace battery (Ensure battery is inserted according to the manufacturer’s   specifications).
  B: The threads, PCB board contact or other contacts are dirty.
  Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

If the above methods don’t work, please contact your authorized distributor.

Warning

• This flashlight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the flashlight directly into anyone’s eyes.
• This flashlight will accumulate a lot of heat when used for extended periods, resulting in high temperature of the flashlight shell. Pay attention to safe use to avoid scalding.
• All information provided in this manual is subject to change without prior notice.