The LD02 V2.0 CW is an extremely compact penlight that is perfect for everyday carry (EDC) and backup use. This penlight features four brightness levels of cool white light operated by the stainless steel tail switch. Powered by one included AAA battery, this light delivers a maximum output of 120 lumens. Waterproof and dustproof, the LD02 V2.0 CW will be your go to penlight for every day lighting needs.

LD02 V2.0 CW Size:

Length: 3.6” (92mm)
Diameter: 0.5” (13.5mm)

LD02 V2.0 CW Weight:

0.8 oz. (24g) excluding battery

LD02 V2.0 CW Battery:

One AAA (alkaline) battery (included)

Included with Penlight:

One AAA (alkaline) battery, spare O-ring

Additional Features of the Fenix LD02 V2.0 CW Penlight

• CREE XD16 S3 cool white LED, with lifespan of 50,000 hours
• Powered by one AAA battery
• Digitally regulated output maintains constant brightness
• Intelligent memory; flashlight turns on last selected brightness level
• Intelligent temperature control, to prevent excessive temperature from affecting the user experience
• Reverse polarity protection to protect from improper battery insertion
• Tail switch for one-handed activation and output selection
• Made of durable high-strength and oxidation-resistance aluminum and stainless steel
• Premium type HAIII hard-anodized anti-abrasive finish
• Optimal quality optical lens

ON/OFF for LD02 V2.0 CW Penlight

Fully press the tail switch to turn on/off the light.

Output Selection

With the light switched on, tap the tail switch to cycle through Eco→Low→Med→High.

Battery Replacement

Unscrew the head to insert the battery with the anode side (+) towards the light head, then screw the light head back on.

Intelligent Memory Circuit

The light memorizes the last selected brightness level. When turned on again the previously used brightness level will be recalled.

Time-limited Downshift

The light will accumulate a lot of heat when used on High output level for extended periods. When the light has been used on High for 1.5 minutes, the light will automatically step down by a few lumens until 50 lumens is reached to reduce the temperature. High mode can be reselected.

Usage and Maintenance

• Disassembling the sealed head can cause damage to the light and will void the warranty.
• Fenix recommends using an excellent quality battery.
• Fenix strongly recommends using high-performance Ni-MH rechargeable batteries to get the most out of this light. Alkaline batteries will reduce the runtime relatively.
• If the light will not be used for an extended period, remove the battery, or the light could be damaged by electrolyte leakage or battery explosion.
• Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare．
• Periodic cleaning of the battery contacts improves the lamp’s performance as dirty contacts may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following reasons:

A: The battery needs replacing.
Solution: Replace battery (Ensure battery is inserted according to the manufacturer’s specifications).

B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

If the above methods don’t work, please contact your authorized distributor.

Warning for LD02 V2.0 CW Penlight

This flashlight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the flashlight directly into anyone’s eyes.