The Fenix WF11E is an intrinsically safe flashlight certified by IECEx, ATEX and SGS. It can be used in Zone 0, Zone 1 and Zone 2 where there is potentially explosive gas, and Zone 20, Zone 21 and Zone 22 in combustible dust atmospheres. Powered by three included AA batteries, this intrinsically safe flashlight has a maximum brightness of 200 lumens. The WF11E also includes a magnetic tail and magnetic body clip, allowing you to attach the light to any metal surface. Made from anti-static plastic, impact resistant to 1m, and IP67 rated waterproof and dustproof help make this flashlight the perfect tool for hazardous situations.

Size:

Length: 6.6” (167.5mm)
Body: 0.9” (24mm)
Head: 1.9” (49mm)

Weight:

5.6oz. (160g) excluding batteries

Battery:

Three AA batteries (included)

Included:

Three AA alkaline batteries, lanyard, spare O-ring

Additional Features of the Fenix WF11E

• Intrinsically safe flashlight for use in hazardous areas.
• Cree XP-G2 neutral white LED with a lifespan of 50,000 hours.
• Powered by three AA alkaline batteries
• Three output levels, max 200 lumens.
• Made of explosion-proof and antistatic plastics.
• Magnetic light tail and body clip.
• Physical reverse polarity protection, to protect from improper battery insertion.

Markings

• Ex ia IIC T4 Ga
• Ex ia IIIC T130℃ Da IP66/IP67
• II 1G Ex ia IIC T4 Ga
• II 1D Ex ia IIIC T130℃ Da IP66/IP67
• Ex ia IIC T4 Ga
• Ex iaD 20 T130℃

On/Off

Press and hold the switch for 0.5 seconds to turn on/off the light.

Output Selection

With the light turned on, single click the switch to cycle through Low→Med→High.

Battery Specifications

Warning:

1. Do not disassemble the light or replace battery in potentially explosive atmospheres.
2. For your safety only use the abovementioned batteries.
3. Do not mix batteries of different types and capacities. Doing so may cause danger, or damage the flashlight.

Battery Replacement

Unscrew the light head and remove the battery holder. Replace the battery and ensure it is inserted in accordance with polarity marks. Insert battery holder into the light body then tighten the light head.

Usage and Maintenance

• Uses only the three recommended types of batteries.
• If the light will not be used for an extended period, remove the battery, or the light could be damaged by electrolyte leakage.
• Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare.

Warning

• Do not disassemble the light or replace battery in potentially explosive atmospheres.
• The flashlight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the flashlight directly into anyone’s eyes.
• Do not use in explosive atmospheres if the flashlight is with missing parts or its shell is obviously broken.